Hohe Qualität von 070-503 Prüfung und Antworten

Wenn Sie sich um die Microsoft 070-503 Zertifizierungsprüfung bemühen, kann Pass4Test Ihnen helfen, Ihren Traum zu erfüllen. Die Übungen zur Microsoft 070-503 Zertifizierungsprüfung werden von der Praxis prüft. Die Schulungsunterlagen zur Microsoft 070-503 Zertifizierungsprüfung sind von guter Qualität, die Ihnen helfen, die Microsoft 070-503 Zertifizierungsprüfung zu bestehen und ein IT-Expert zu werden.

Machen Sie sich noch Sorgen um die Microsoft 070-503 Zertifizierungsprüfung?Warten Sie noch mühelos auf die neuesten Materialien zur Microsoft 070-503 Zertifizierungsprüfung?Pass4Test hat neuerlich die neuesten Materialien zur Microsoft 070-503 Zertifizierungsprüfung bearbeitet. Wollen Sie die Microsoft 070-503 Zertifizierungsprüfung bestehen?Bitte schicken Sie doch schnell die Fragen und Antworten zur Microsoft 070-503 Zertifizierungsprüfung in den Warenkorb! Sie können kostenlos Teil der Fragen und Antworten in Pass4Test Website herunterladen, um unsere Zuverlässigkeit zu bestimmen. Wir versprechen, dass wir Ihnen die gesammte Summe zurückerstattet, falls Sie mit unseren Prüfungsmaterialien trotz in der Microsoft 070-503 Zertifizierungsprüfung durchfallen.

Hier möchte ich über eine Kernfrage sprechen. Alle Prüfungen zur Microsoft 070-503 sind wichtig. Im Zeitalter, wo die Information hoch entwickelt ist, ist Pass4Test nur eine der zahlreichen Websites. Warum wählen viele Leute Pass4Test?Denn die Prüfungsmaterialien von Pass4Test werden Ihnen sicher beim Bestehen der Prüfung helfen. Pass4Test aktualisiert ständig seine Materialien und Trainingsinstrumente. Mit den Prüfungsfragen und Antworten zur Microsoft 070-503 Zertifizierungsprüfung von Pass4Test werden Sie mehr Selbstbewusstsein für die Prüfung haben. Sie brauchen sich keine Sorgen um das Risiko der Prüfung zu machen. Sie können ganz einfach die Prüfung bestehen.

Die Produkte von Pass4Test sind von guter Qualität. Sie sind am schnellsten aktualisiert. Wenn Sie die Schulungsunterlagen zur Microsoft 070-503 Zertifizierungsprüfung kaufen, können Sie die Microsoft 070-503 Zertifizierungsprüfung sicher bestehen.

Die Schulungsunterlagen zur Microsoft 070-503 Zertifizierungsprüfung von Pass4Test sind die besten Schulungsunterlagen. Wir sind bei den Kandidaten sehr beliebt. Wenn Sie die Schulungsunterlagen zur Microsoft 070-503 Zertifizierungsprüfung von Pass4Test zur Pass4Test benutzen, geben wir Ihnen eine 100%-Pass-Garantie. Sonst erstatteten wir Ihnen die gammte Summe zurück, um Ihre Interessen zu schützen. Unser Pass4Test ist ganz zuverlässig.

Exam Code: 070-503

Prüfungsname: Microsoft (TS: Microsoft .NET Framework 3.5 C Windows Communication Foundation)

Die Microsoft 070-503 Zertifizierungsprüfung ist heutztage sehr beliebt. Pass4Test wird Ihnen helfen, die Prüfung zu bestehen, und bietet Ihnen einen einjährigen kostenlosen Update-Service. Dann wählen Sie doch Pass4Test, um Ihren Traum zu erfüllen. Um Erfolg zu erringen, ist Ihnen weise, Pass4Test zu wählen. Wählen Sie Pass4Test, Sie werden der nächste IT-Elite sein.

070-503 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/070-503.html

NO.1 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service contains the following code segment.
<ServiceContract()> _
Public Interface IMyService
<OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.None)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
End Interface
You need to ensure that the DoSomething operation can participate in transactions.
Which code segment should you use to replace the existing operation contract?
A. <OperationContract( _
ProtectionLevel:=ProtectionLevel.None)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
B. <OperationContract( _
ProtectionLevel:=ProtectionLevel.EncryptAndSign)> _
<TransactionFlow(TransactionFlowOption.NotAllowed)> _
Sub DoSomething()
C. <OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.EncryptAndSign)> _
<TransactionFlow(TransactionFlowOption.Allowed)> _
Sub DoSomething()
D. <OperationContract(IsOneWay:=True, _
ProtectionLevel:=ProtectionLevel.Sign)> _
<TransactionFlow(TransactionFlowOption.Mandatory)> _
Sub DoSomething()
Answer: A

Microsoft prüfungsfrage   070-503   070-503   070-503 prüfungsfrage

NO.2 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(Namespace="http://uri.contoso.com")]
02 public interface IMyService
03 {
04 [OperationContract]
05 string ProcessDetails(string s);
06 [OperationContract(Action="UpdateStatus")]
07 void UpdateStatus();
08
09 }
If the existing operation contract is unable to process a request made to the service, a generic operation
contract must attempt to process the request.
You need to create the generic operation contract.
Which code segment should you insert at line 08?
A. [OperationContract(Action="*")]
void ProcessOthers(Message msg);
B. [OperationContract(Action="*")]
void ProcessOthers();
C. [OperationContract(Action="Default")]
void ProcessOthers(Message msg);
D. [OperationContract(Action="Default")]
void ProcessOthers();
Answer: A

Microsoft echte fragen   070-503   070-503 antworten   070-503

NO.3 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void InitializeRuntime()
{
//Load configuration here
}
}
B. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected override void ApplyConfiguration()
{
//Load configuration here
}
}
C. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void InitializeDescription(Type serviceType,
UriSchemeKeyedCollection baseAddresses)
{
//Load configuration here.
}
}
D. class MyServiceHost : ServiceHost
{
public MyServiceHost(Type serviceType,
params Uri[] baseAddresses) : base(serviceType, baseAddresses)
{
}
protected new void AddBaseAddress(Uri baseAddress)
{
//Load configuration here.
}
}
Answer: B

Microsoft prüfungsunterlagen   070-503   070-503   070-503 dumps

NO.4 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 <ServiceContract(Namespace:="http://uri.contoso.com")> _
02 Public Interface IMyService
03 <OperationBehavior()> _
04 Function ProcessDetails(ByVal s As String) As String
05 <OperationContract(Action:="UpdateStatus")> _
06 Sub UpdateStatus()
07
08 End Interface
If the existing operation contract is unable to process a request made to the service, a generic operation
contract must attempt to process the request.
You need to create the generic operation contract.
Which code segment should you insert at line 07?
A. <OperationContract(Action:="*")> _
Sub ProcessOthers(ByVal msg As Message)
B. <OperationContract(Action:="*")> _
Sub ProcessOthers()
C. <OperationContract(Action:="Default")> _
Sub ProcessOthers(ByVal msg As Message)
D. <OperationContract(Action:="Default")> _
Sub ProcessOthers()
Answer: A

Microsoft prüfungsfrage   070-503   070-503   070-503

NO.5 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 public interface IMyService
02 {
03
04 string ProcessString(string name);
05 }
You create a host for the WCF service. You also create a service endpoint at http://localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http://localhost:8080/service/process?name=value
Which code segment should you insert at line 03?
A. [OperationContract(Name="process", Action="Get")]
B. [OperationContract(Name="process", Action="Post")]
C. [OperationContract]
[WebGet(UriTemplate = "process?name={name}")]
D. [OperationContract]
[WebInvoke(UriTemplate = "process?name={name}")]
Answer: C

Microsoft originale fragen   070-503 originale fragen   070-503 testantworten   070-503 dumps   070-503 zertifizierungsantworten

NO.6 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Action="*")]
void ProcessSimpleOrder();
[OperationContract]
void ProcessComplexOrder();
}
B. [ServiceContract]
public interface IOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
C. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract]
void ProcessSimpleOrder();
}
[ServiceContract]
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract]
void ProcessComplexOrder();
}
D. [ServiceContract]
public interface ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Simple")]
void ProcessSimpleOrder();
}
public interface IComplexOrderManager: ISimpleOrderManager
{
[OperationContract(Name="http: //contoso.com/Complex")]
void ProcessComplexOrder();
}
Answer: C

Microsoft prüfungsfragen   070-503 zertifizierungsantworten   070-503 prüfung   070-503   070-503 prüfungsfragen

NO.7 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. You have successfully defined a service contract named IManageOrders.
You write the following code segment.
public class OrderImpl : IManageOrders {
public void MarkOrderClosed(int orderId){
try {
...
}
catch (SqlException exc){
throw new FaultException<DataFault>(new DataFault());
}
}
}
[DataContract]
public class DataFault {
}
You need to create a fault contract for the MarkOrderClosed method on the IManageOrders service
contract.
Which code segment should you add?
A. [FaultContract(typeof(DataFault))]
B. [FaultContract(typeof(Exception))]
C. [FaultContract(typeof(SqlException))]
D. [FaultContract(typeof(FaultException))]
Answer: A

Microsoft   070-503   070-503 originale fragen

NO.8 You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
<ServiceContract(Name:="SvcOrder", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyService
<OperationContract()> _
Sub DoSomething()
End Interface
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. <ServiceContract(Namespace:="http: //contoso.com/services/V1")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
B. <ServiceContract(Name:="SvcOrder")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
C. <ServiceContract(Name:="SvcOrderV1", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
D. <ServiceContract(Name:="SvcOrder", _
Namespace:="http: //contoso.com/services")> _
Public Interface IMyServiceV1
Inherits IMyService
<OperationContract()> _
Sub DoSomethingElse()
End Interface
Answer: D

Microsoft   070-503 dumps   070-503   070-503   070-503 prüfungsunterlagen

NO.9 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service contains the following code segment.
[ServiceContract]
public interface IMyService
{
[OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.None)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
}
You need to ensure that the DoSomething operation can participate in transactions.
Which code segment should you use to replace the existing operation contract?
A. [OperationContract(ProtectionLevel=ProtectionLevel.None)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
B. [OperationContract(ProtectionLevel=
ProtectionLevel.EncryptAndSign)]
[TransactionFlow(TransactionFlowOption.NotAllowed)]
void DoSomething();
C. [OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.EncryptAndSign)]
[TransactionFlow(TransactionFlowOption.Allowed)]
void DoSomething();
D. [OperationContract(IsOneWay=true,
ProtectionLevel=ProtectionLevel.Sign)]
[TransactionFlow(TransactionFlowOption.Mandatory)]
void DoSomething();
Answer: A

Microsoft zertifizierung   070-503 zertifizierungsantworten   070-503   070-503

NO.10 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will contain an enumeration named OrderState.
The OrderState enumeration will contain the following four values:
Processing
Cancelled
Confirmed
Closed
The client application must be able to set the state of an Order entity to only the following two values:
Cancelled
Closed
You need to create the data contract for OrderState.
Which code segment should you use?
A. [DataContract]
public enum OrderState
{
Processing=1,
[DataMember]
Cancelled=2,
[DataMember]
Confirmed=3,
Closed=4
}
B. [DataContract]
public enum OrderState
{
Processing=1,
[EnumMember]
Cancelled=2,
Confirmed=3,
[EnumMember]
Closed=4
}
C. [DataContract]
public enum OrderState
{
[EnumMember(Value="False")]
Processing=1,
[EnumMember(Value="True")]
Cancelled=2,
[EnumMember(Value="True")]
Confirmed=3,
[EnumMember(Value="False")]
Closed=4
}
D. [DataContract]
public enum OrderState
{
[DataMember]
Processing=1,
[DataMember(IsRequired=true)]
Cancelled=2,
[DataMember]
Confirmed=3,
[DataMember(IsRequired=true)]
Closed=4
}
Answer: B

Microsoft   070-503   070-503 antworten   070-503

NO.11 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. <OperationContract()> _
Sub UploadFile(ByVal xmlData As Stream)
B. <OperationContract()> _
Sub UploadFile(ByVal xmlData As XmlWriter)
C. <OperationContract()> _
Sub UploadFile(ByVal xmlData As StreamWriter)
D. <OperationContract()> _
Sub UploadFile(ByVal xmlData As Byte())
Answer: A

Microsoft   070-503 prüfungsfragen   070-503

NO.12 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. String baseAddress="http: //localhost:8000/ExamService";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
B. String baseAddress="http: //localhost:8000/ExamService/service";
BasicHttpBinding binding1=new BasicHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
C. String baseAddress="http: //localhost:8000/ExamService";
WsHttpBinding binding1=new WsHttpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
D. String baseAddress="net.tcp: //localhost:8000/ExamService/service";
NetTcpBinding binding1=new NetTcpBinding();
using(ServiceHost host=new ServiceHost(typeof(ExamService)))
{
host.AddServiceEndpoint(typeof(IExam),binding1,baseAddress);
}
Answer: B

Microsoft   070-503   070-503 prüfung   070-503 zertifizierungsantworten

NO.13 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 [ServiceContract(SessionMode=SessionMode.Required)]
02 public interface IOrderManager
03 {
04
05 void CloseOrder();
06 }
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 04?
A. [OperationContract(IsInitiating=false)]
B. [OperationContract(IsTerminating=true)]
C. [OperationContract]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
D. [OperationContract(IsTerminating=false)]
[OperationBehavior(ReleaseInstanceMode=
ReleaseInstanceMode.AfterCall)]
Answer: B

Microsoft   070-503   070-503   070-503

NO.14 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 <ServiceContract(SessionMode:=SessionMode.Required)> _
02 Public Interface IOrderManager
03
04 Sub CloseOrder()
05 End Interface
You need to decorate the operation as the method that closes the current session.
Which code segment should you insert at line 03?
A. <OperationContract(IsInitiating:=False)> _
B. <OperationContract(IsTerminating:=True)> _
C. <OperationContract()> _
<OperationBehavior( _
ReleaseInstanceMode:=ReleaseInstanceMode.AfterCall)> _
D. <OperationContract(IsTerminating:=False)> _
<OperationBehavior( _
ReleaseInstanceMode:=ReleaseInstanceMode.AfterCall)> _
Answer: B

Microsoft testantworten   070-503 prüfungsfrage   070-503 zertifizierung

NO.15 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The service will be hosted in a Console application.
You need to configure the service by using a configuration file other than the default app.config file.
Which code segment should you use?
A. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Overrides Sub InitializeRuntime()
'Load configuration here
End Sub
End Class
B. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Overrides Sub ApplyConfiguration()
'Load configuration here
End Sub
End Class
C. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Shadows Sub InitializeDescription( _
ByVal serviceType As Type, _
ByVal baseAddresses As UriSchemeKeyedCollection)
'Load configuration here
End Sub
End Class
D. Class MyServiceHost
Inherits ServiceHost
Public Sub New(ByVal serviceType As Type, _
ByVal ParamArray baseAddresses As Uri())
MyBase.New(serviceType, baseAddresses)
End Sub
Protected Shadows Sub AddBaseAddresses(ByVal baseAddress As Uri)
'Load configuration here
End Sub
End Class
Answer: B

Microsoft   070-503 prüfung   070-503 dumps

NO.16 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET Framework
3.5.
The WCF service contains two operations named ProcessSimpleOrder and ProcessComplexOrder.
You need to expose the ProcessSimpleOrder operation to all the client applications. You also need to
expose the ProcessComplexOrder operation only to specific client applications.
Which code segment should you use?
A. <ServiceContract()> _
Public Interface IOrderManager
<OperationContract(Action:="*")> _
Sub ProcessSimpleOrder()
<OperationContract()> _
Sub ProcessComplexOrder()
End Interface
B. <ServiceContract()> _
Public Interface IOrderManager
<OperationContract(Name:="http: //contoso.com/Simple")> _
Sub ProcessSimpleOrder()
<OperationContract(Name:="http: //contoso.com/Complex")> _
Sub ProcessComplexOrder()
End Interface
C. <ServiceContract()> _
Public Interface ISimpleOrderManager
<OperationContract()> _
Sub ProcessSimpleOrder()
End Interface
<ServiceContract()> _
Public Interface IComplexOrderManager
Inherits ISimpleOrderManager
<OperationContract()> _
Sub ProcessComplexOrder()
End Interface
D. <ServiceContract()> _
Public Interface ISimpleOrderManager
<OperationContract(Name:="http: //contoso.com/Simple")> _
Sub ProcessSimpleOrder()
End Interface
Public Interface IComplexOrderManager
Inherits ISimpleOrderManager
<OperationContract(Name:="http: //contoso.com/Complex")> _
Sub ProcessComplexOrder()
End Interface
Answer: C

Microsoft   070-503   070-503   070-503   070-503

NO.17 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework

NO.18 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
[XmlElement]
public string Name;
[XmlAttribute]
public string Currency;
[XmlElement]
public double Balance;
}
B. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
C. [Serializable]
public class Account
{
[XmlAttribute]
public string Id;
public string Name;
[XmlElement("Balance")]
public BalanceVal Balance;
}
[Serializable]
public class BalanceVal
{
[XmlText]
public double Amount;
[XmlAttribute]
public string Currency;
}
D. [DataContract]
public class Account
{
[DataMember(Order=0)]
public string Id;
[DataMember(Order=1)]
public string Name;
[DataMember(Name="Balance", Order=2)]
public BalanceVal Balance;
}
[DataContract]
public struct BalanceVal
{
[DataMember(Order=0)]
public double Balance;
[DataMember(Order=1)]
public string Currency;
}
Answer: C

Microsoft zertifizierungsfragen   070-503   070-503 prüfungsunterlagen   070-503 zertifizierung   070-503

NO.19 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
[ServiceContract]
public interface IMathService
{
[OperationContract]
int AddNumbers(int a, int b);
double AddNumbers(double a, double b);
}
You have not deployed the IMathService service.
You need to expose the AddNumbers (double a, double b) operation to the IMathService service contract.
Which code segment should you use?
A. [OperationContract]
int AddNumbers(int a, int b);
[OperationContract]
double AddNumbers(double a, double b);
B. [OperationContract(Name="AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Name="AddDouble")]
double AddNumbers(double a, double b);
C. [OperationContract(Action="IMathService/AddInt")]
int AddNumbers(int a, int b);
[OperationContract(Action="IMathService/AddDouble")]
double AddNumbers(double a, double b);
D. [OperationContract(Action="AddInt/*")]
int AddNumbers(int a, int b);
[OperationContract(Action="AddDouble/*")]
double AddNumbers(double a, double b);
Answer: B

Microsoft exam fragen   070-503 prüfungsfragen   070-503 prüfungsfragen   070-503   070-503 zertifizierungsfragen

NO.20 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. [MessageContract]
public class MyMessage
{
[MessageHeader]
public string[] Data;
}
B. [MessageContract]
public class MyMessage
{
[MessageHeaderArray]
public string[] Data;
}
C. [MessageContract]
public class MyMessage
{
[MessageProperty]
public string[] Data;
}
D. [MessageContract]
public class MyMessage
{
[MessageBodyMember (Order=0)]
public string[] Data;
}
Answer: A

Microsoft echte fragen   070-503   070-503 echte fragen   070-503   070-503

NO.21 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
<DataContract()> _
Public Class Person
...
End Class
<DataContract()> _
Public Class Customer
Inherits Person
...
End Class
You need to create a service contract that meets the following requirements:
The service contract must have an operation contract named GetPerson that returns an object of type
Person.
The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. <ServiceContract()> _
<ServiceKnownType("GetPerson")> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
B. <ServiceContract()> _
Public Interface IMyService
<OperationContract()> _
<ServiceKnownType("Customer")> _
Function GetPerson() As Person
End Interface
C. <ServiceContract()> _
<ServiceKnownType(GetType(Customer))> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
D. <ServiceContract()> _
<ServiceKnownType("GetPerson", GetType(Customer))> _
Public Interface IMyService
<OperationContract()> _
Function GetPerson() As Person
End Interface
Answer: C

Microsoft   070-503 echte fragen   070-503 dumps   070-503   070-503

NO.22 5. You have successfully defined a service contract named IManageOrders.
You write the following code segment.
Public Class OrderImpl
Implements IManageOrders
Public Sub MarkOrderClosed(ByVal orderId As Integer) _
Implements IManageOrders.MarkOrderClosed
Try
...
Catch ex As SqlException
Throw New FaultException(Of DataFault)( _
New DataFault())
End Try
End Sub
End Class
<DataContract()> _
Public Class DataFault
End Class
You need to create a fault contract for the MarkOrderClosed method on the IManageOrders service
contract.
Which code segment should you add?
A. <FaultContract(GetType(DataFault))>
B. <FaultContract(GetType(Exception))>
C. <FaultContract(GetType(SqlException))>
D. <FaultContract(GetType(FaultException))>
Answer: A

Microsoft   070-503 prüfungsfragen   070-503   070-503 zertifizierungsantworten
3. You have created a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
The existing service interface is named IMyService, and contains the following code segment.
[ServiceContract(Name="SvcOrder",
?Namespace="http://contoso.com/services")]
public interface IMyService
{
[OperationContract]
void DoSomething();
}
You create a new service named IMyServiceV1 that contains an operation named DoSomethingElse.
You need to ensure that existing client applications are still able to access the IMyService.DoSomething
method without modifying client code.
Which code segment should you use?
A. [ServiceContract(Namespace="http:?//contoso.com/services/V1")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
B. [ServiceContract(Name="SvcOrder")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
C. [ServiceContract(Name="SvcOrderV1",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
D. [ServiceContract(Name="SvcOrder",
Namespace="http: //contoso.com/services")]
public interface IMyServiceV1 : IMyService
{
[OperationContract]
void DoSomethingElse();
}
Answer: D

Microsoft   070-503 antworten   070-503   070-503   070-503

NO.23 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
You write the following code segment.
<ServiceContract()> _
Public Interface IMathService
<OperationContract()> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
End Interface
You have not deployed the IMathService service.
You need to expose the AddNumbers (a As Double, b As Double) As Double operation to the
IMathService service contract.
Which code segment should you use?
A. <OperationContract()> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract()> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
B. <OperationContract(Name:="AddInt")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Name:="AddDouble")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
C. <OperationContract(Action:="IMathService/AddInt")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Action:="IMathService/AddDouble")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
D. <OperationContract(Action:="AddInt/*")> _
Function AddNumbers( _
ByVal a As Integer, ByVal b As Integer) As Integer
<OperationContract(Action:="AddDouble/*")> _
Function AddNumbers( _
ByVal a As Double, ByVal b As Double) As Double
Answer: B

Microsoft dumps   070-503 zertifizierungsantworten   070-503 echte fragen   070-503   070-503

NO.24 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that the service can send data in the following format to the client applications.
<Account Id="">
<Name> </Name>
<Balance Currency=""> </Balance>
</Account>
Which code segment should you use?
A. <Serializable()> _
Public Class Account
<XmlAttribute()> _
Public Id As String
<XmlElement()> _
Public Name As String
<XmlAttribute()> _
Public Currency As String
<XmlElement()> _
Public Balance As Double
End Class
B. <DataContract()> _
Public Class Account
<DataMember(Order:=0)> _
Public Id As String
<DataMember(Order:=1)> _
Public Name As String
<DataMember(Order:=0)> _
Public Balance As Double
<DataMember(Order:=1)> _
Public Currency As String
End Class
C. <Serializable()> _
Public Class Account
<XmlAttribute()> _
Public Id As String
Public Name As String
<XmlElement("Balance")> _
Public Balance As BalanceVal
End Class
<Serializable()> _
Public Class BalanceVal
<XmlText()> _
Public Amount As Double
<XmlAttribute()> _
Public Currency As String
End Class
D. <DataContract()> _
Public Class Account
<DataMember(Order:=0)> _
Public Id As String
<DataMember(Order:=1)> _
Public Name As String
<DataMember(Name:="Balance", Order:=2)> _
Public Balance As BalanceVal
End Class
<DataContract()> _
Public Structure BalanceVal
<DataMember(Order:=0)> _
Public Amount As Double
<DataMember(Order:=1)> _
Public Currency As String
End Structure
Answer: C

Microsoft   070-503 antworten   070-503 zertifizierungsantworten   070-503 prüfungsunterlagen

NO.25 You create a Windows Communication Foundation service by using Microsoft .NET Framework 3.5.
The service contains the following code segment.
[DataContract]
public class Person
{
}
[DataContract]
public class Customer : Person
{
}
You need to create a service contract that meets the following requirements:
The service contract must have an operation contract named GetPerson that returns an object of type
Person.
The GetPerson operation must be able to return an object of type Customer.
Which code segment should you use?
A. [ServiceContract]
[ServiceKnownType("GetPerson")]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
B. [ServiceContract]
public interface IMyService
{
[OperationContract]
[ServiceKnownType("Customer")]
Person GetPerson();
}
C. [ServiceContract]
[ServiceKnownType(typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
D. [ServiceContract]
[ServiceKnownType("GetPerson",typeof(Customer))]
public interface IMyService
{
[OperationContract]
Person GetPerson();
}
Answer: C

Microsoft zertifizierungsantworten   070-503 echte fragen   070-503   070-503

NO.26 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to programmatically add the following endpoint definition to the service.
http://localhost:8000/ExamService/service
Which code segment should you use?
A. Dim baseAddress As String = "http: //localhost:8000/ExamService"
Dim binding1 As New BasicHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
B. Dim baseAddress As String = _ "http: //localhost:8000/ExamService/service"
Dim binding1 As New BasicHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
C. Dim baseAddress As String = "http: //localhost:8000/ExamService"
Dim binding1 As New WSHttpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
D. Dim baseAddress As String = _
"http: //localhost:8000/ExamService/service"
Dim binding1 As New NetTcpBinding()
Using host As New ServiceHost(GetType(ExamService))
host.AddServiceEndpoint(GetType(IExam), binding1, baseAddress)
End Using
Answer: B

Microsoft   070-503   070-503 testantworten

NO.27 You create a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You write the following code segment. (Line numbers are included for reference only.)
01 Public Interface IMyService
02
03 Function ProcessString(ByVal name As String) As String
04 End Interface
You create a host for the WCF service. You also create a service endpoint at http: //localhost:8080/service.
You add an instance of the HttpTransferEndPointBehavior class to the host.
You need to ensure that the ProcessString method can be invoked from a Web browser by using the URL
http: //localhost:8080/service/process?name=value
Which code segment should you insert at line 02?
A. <OperationContract(Name:="process", Action:="Get")> _
B. <OperationContract(Name:="process", Action:="Post")> _
C. <OperationContract()> _
<HttpTransferContract(Path:="process", Method:="Get")> _
D. <OperationContract()> _
<HttpTransferContract(Path:="process", Method:="Post")> _
Answer: C

Microsoft exam fragen   070-503 originale fragen   070-503 exam fragen

NO.28 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5.
You need to ensure that data sent in a SOAP header is in the following XML format.
<Data>
<string>String 1</string>
<string>String 2</string>
<string>String 3</string>
</Data>
Which code segment should you use?
A. <MessageContract()> _
Public Class MyMessage
<MessageHeader()> _
Public Data() As String
End Class
B. <MessageContract()> _
Public Class MyMessage
<MessageHeaderArray()> _
Public Data() As String
End Class
C. <MessageContract()> _
Public Class MyMessage
<MessageProperty()> _
Public Data() As String
End Class
D. <MessageContract()> _
Public Class MyMessage
<MessageBodyMember(Order:=0)> _
Public Data() As String
End Class
Answer: A

Microsoft exam fragen   070-503 echte fragen   070-503   070-503 exam fragen   070-503 prüfungsunterlagen   070-503

NO.29 You are creating a Windows Communication Foundation service by using Microsoft .NET Framework
3.5. The service will contain an enumeration named OrderState.
The OrderState enumeration will contain the following four values:
Processing
Cancelled
Confirmed
Closed
The client application must be able to set the state of an Order entity to only the following two values:
Cancelled
Closed
You need to create the data contract for OrderState.
Which code segment should you use?
A. <DataContract()> _
Public Enum OrderState
Processing = 1
<DataMember()> _
Cancelled = 2
<DataMember()> _
Confirmed = 3
Closed = 4
End Enum
B. <DataContract()> _
Public Enum OrderState
Processing = 1
<EnumMember()> _
Cancelled = 2
Confirmed = 3
<EnumMember()> _
Closed = 4
End Enum
C. <DataContract()> _
Public Enum OrderState
<EnumMember(Value:="False")> _
Processing = 1
<EnumMember(Value:="True")> _
Cancelled = 2
<EnumMember(Value:="True")> _
Confirmed = 3
<EnumMember(Value:="False")> _
Closed = 4
End Enum
D. <DataContract()> _
Public Enum OrderState
<DataMember()> _
Processing = 1
<DataMember(IsRequired:=True)> _
Cancelled = 2
<DataMember()> _
Confirmed = 3
<DataMember(IsRequired:=True)> _
Closed = 4
End Enum
Answer: B

Microsoft dumps   070-503 zertifizierungsfragen   070-503 testantworten   070-503

NO.30 You are creating a Windows Communication Foundation (WCF) service by using Microsoft .NET
Framework 3.5.
You configure a binding to enable streaming.
You need to ensure that the client application is able to stream large XML files to the WCF service.
Which operation contract should you create?
A. [OperationContract]
void UploadFile(Stream xmlData);
B. [OperationContract]
void UploadFile(XmlWriter xmlData);
C. [OperationContract]
void UploadFile(StreamWriter xmlData);
D. [OperationContract]
void UploadFile(byte[] xmlData);
Answer: A

Microsoft   070-503   070-503   070-503 antworten   070-503 zertifizierungsfragen

Pass4Test ist eine Website, die die Erfolgsquote von Microsoft 070-503 Zertifizierungsprüfung erhöhen kann. Die erfahrungsreichen IT-Experten entwickeln ständig eine Vielzahl von Programmen, um zu garantierern, dass Sie die Microsoft 070-503 Zertifizierungsprüfung 100% erfolgreich bestehen können. Die Trainingsinstrumente von Pass4Test sind sehr effektiv. Viele IT-Leute, die die Prüfung bestanden haben, haben die Prüfungsfragen und Antworten von Pass4Test benutzt. Mit der Hilfe von Pass4Test haben viele auch die Microsoft 070-503 Zertifizierungsprüfung bestanden. Wenn Sie Pass4Test wählen, kommt der Erfolg auf Sie zu.