Die Schulungsunterlagen sind den echten Prüfungen ähnlich. Durch die kurze Sonderausbildung können Sie schnell die Fachkenntnisse beherrschen und sich gut auf die Prüfung vorbereiten. Wir versprechen, dass wir alles tun würden, um Ihnen beim Bestehen der CompTIA RF0-001 Zertifizierungsprüfung helfen.
CompTIA RF0-001 Zertifizierungsprüfung sowie Cisco, IBM, HP Prüfungen sind jetzt sehr populär Wenn Sie die CompTIA RF0-001 Zertifizierung bekommen, realisieren die CompTIA RF0-001 dumps Ihren Wunsch. Nach dem Erfolg der CompTIA RF0-001 Zertifizierung können Sie auch andere IT-Zertifizierungsprüfungen ablegen. Es gibt keine Probleme für alle Prüfungen, wenn Sie Pass4Test dumps besitzen.
Sind Sie einer von den vielen?Machen Sie sich noch Sorgen wegen den zahlreichen Kurse und Materialien zur RF0-001 Zertifizierungsprüfung?Pass4Test ist Ihnen eine weise Wahl, denn wir Ihnen die umfassendesten Prüfungsmaterialien bieten, die Fragen und Antworten und ausführliche Erklärungen beinhalten. Alle diesen werden Ihnen helfen, die Fachkenntnisse zu beherrschen. Wir sind selbstsicher, dass Sie die RF0-001 Zertifizierungsprüfung bestehen. Das ist unser Versprechen an den Kunden.
Haben sie von CompTIA RF0-001 dumps von Pass4Test gehört? Aber, Haben Sie diese dumps benutzt? Viele Leute haben gesagt, dass Pass4Test dumps sehr gute Unterlagen sind, womit sie die Prüfung bestanden haben. Wir Pass4Test sind von vielen Leuten, die früher die dumps benutzt haben, gut bewertet, weil sie wirklich viel Zeit für die Prüfungen sparen und den Erfolg für die Teilnehmer garantieren.
Exam Code: RF0-001
Prüfungsname: RFID+ Certification
Aktulisiert: 2013-11-30
Nummer: 162 Q&As
RF0-001 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/RF0-001.html
NO.1 RFID media should be stored in:
A. electrostatic discharge (ESD) protected packaging.
B. metal containers.
C. rolls of ten.
D. the order that it was received.
Answer: A
CompTIA echte fragen RF0-001 prüfungsfragen RF0-001
NO.2 Which of the following materials have absorptive properties in relation to ultra high frequency (UHF)?
(Select TWO).
A. Damp cardboard
B. Glass
C. Conductive liquids
D. Metal
Answer: AC
CompTIA prüfungsfrage RF0-001 antworten RF0-001
NO.3 Which of the following RFID tags would be BEST for inconspicuous tagging of assets containing a
maximum of eight bytes of data and are inductively coupled?
A. Active 433.92 MHz tag with strategically installed fixed interrogators.
B. Passive 13.56 MHz tag that is affixed to the asset and camouflaged requiring continuous loop
interrogation.
C. Passive Gen 2 tag requiring line of sight backscatter interrogation.
D. Active 433.92 MHz tag requiring modulated backscatter interrogation.
Answer: B
CompTIA RF0-001 RF0-001 echte fragen RF0-001 RF0-001 originale fragen
NO.4 It is important to know where an RFID inlay is located within a tag during printing because: (Select
TWO).
A. the inlay location directs the printer to print landscape or portrait.
B. the inlay sets the speed of the printer.
C. printing over the chip may cause damage.
D. timing from leading edge is critical to the encoding process.
Answer: CD
CompTIA zertifizierungsantworten RF0-001 prüfungsfrage RF0-001 exam fragen RF0-001 originale fragen
NO.5 When firmware upgrades become available, which of the following should the technician consider
FIRST?
A. How to install the upgrade.
B. When to schedule the upgrade.
C. Whether the upgrade can be downloaded from the internet.
D. The benefits of new upgrade.
Answer: D
CompTIA RF0-001 RF0-001 RF0-001 prüfungsfrage
NO.6 Loss of connection between an interrogator and the edgeware/middleware would result in which of the
following?
A. Only active RFID tag data would be processed.
B. No tag data would be processed.
C. Tag data would be sent directly to the Warehouse Management System (WMS).
D. Only interrogator status would be tracked.
Answer: B
CompTIA RF0-001 RF0-001 RF0-001 prüfungsfragen
NO.7 Which of the following conditions would be MOST likely to cause a ghost tag read?
A. The interrogator did not pass electronic product code (EPC) compliance testing.
B. There is a broken strap between the chip and the antenna on the tag.
C. There are too many tags within an interrogator zone.
D. There is RF interference in an interrogator zone.
Answer: D
CompTIA RF0-001 RF0-001 testantworten RF0-001 zertifizierungsantworten
NO.8 Tags placed on small boxes uniformly stacked on a pallet are unreadable unless the pallet is rotated.
This is a symptom of tag:
A. propagation.
B. size.
C. shadowing.
D. polarity.
Answer: C
CompTIA RF0-001 RF0-001 testantworten
NO.9 In a facility with several automated print and apply printers, cases frequently get to the palletizer without
RFID labels. One way to correct this is to:
A. install an interrogation zone down stream from the labeler with a reject system.
B. have an interrogator on the palletizer.
C. use better quality labels.
D. use a hand-held interrogator to scan for missing labels at end of production line.
Answer: A
CompTIA exam fragen RF0-001 RF0-001 prüfungsfragen RF0-001
NO.10 An Electronic Product Code (EPC) Class 1 Gen 2 RFID system reads the EPC data from memory bank
zero, but the 64-bit EPC code is always zero. Which of the following is MOST likely the cause of the
problem?
A. The EPC code is stored in Bank 1.
B. The tag has been killed.
C. The EPC code was never written to the tag.
D. The access password is zero.
Answer: A
CompTIA RF0-001 testantworten RF0-001 echte fragen RF0-001
NO.11 Cases are going to be tagged and stored in a humid, high temperature area. Which of the following
types of labels would be needed?
A. Poly-coated with gum adhesive.
B. Direct thermal with gum adhesive.
C. Poly-coated with water base adhesive.
D. Paper with gum adhesive.
Answer: A
CompTIA RF0-001 RF0-001 prüfungsunterlagen RF0-001 prüfungsfrage
NO.12 All of the following are true of widely implemented "slap and ship" programs EXCEPT they:
A. make it difficult to optimize label application for the container.
B. are more susceptible to electrostatic discharge (ESD) than in-line automatic applicators.
C. are lower in cost than application in manufacturing.
D. are more likely to break the bond between the antenna and the chip.
Answer: C
CompTIA RF0-001 RF0-001
NO.13 While troubleshooting an interrogation zone, a technician discovers that the antenna wires have torn
free of their connectors. Which of the following would be the FIRST step for the technician to take?
A. Secure the cables so they cannot tear free again.
B. Crimp a new end on the cable.
C. Power down the interrogator.
D. Attach the repaired cable to the antenna.
Answer: C
CompTIA RF0-001 exam fragen RF0-001
NO.14 Ideally, as a tag passes though the antenna read window it should be:
A. inside metal foil.
B. on the same plane as the antenna.
C. at least 30 feet (9.3 meters) from the antenna.
D. facing away from antenna.
Answer: B
CompTIA RF0-001 RF0-001 antworten RF0-001
NO.15 Desktop industrial RFID-enabled bar code printers handle an inoperative tag by:
A. sending an error to the host.
B. printing 'void' or some other marking on the label.
C. ejecting the label.
D. ignoring it and continuing.
Answer: B
CompTIA testantworten RF0-001 RF0-001 echte fragen RF0-001
NO.16 Which of the following technologies would provide the BEST read range when attached to a
corrugated metal freight container that is 40 feet (12.4 meters)?
A. Passive 13.56 MHz from a one watt interrogator/antenna
B. Passive 860 - 960 MHz from a 4 watt interrogator/antenna C. Active 433.92 MHz, operating at 10 mW
D. Active 2450 MHz, operating at 10 mW
Answer: C
CompTIA dumps RF0-001 originale fragen RF0-001 RF0-001 testantworten
NO.17 A new batch of tags is received for an existing system. When the new tags are introduced into the
system, the interrogation zones stop transmitting tag data. Which of the following is MOST likely the
source of the problem?
A. The new tags are all bad.
B. The new tags are the wrong type for the system.
C. A tag virus has been introduced by the new tags.
D. The interrogators have issued the kill command to the tags.
Answer: B
CompTIA originale fragen RF0-001 antworten RF0-001 exam fragen RF0-001 RF0-001
NO.18 For a corrugated case filled with liquor bottles containing metal lids, all of the following locations are
acceptable for optimizing the performance of a passive high frequency (HF) RFID smart label EXCEPT on
the: (Select TWO).
A. side near the bottom where there is the most amount of liquid.
B. side near the top where there is the least amount of liquid.
C. bottom where there is the most amount of glass.
D. top near the metal lids.
Answer: AD
CompTIA RF0-001 dumps RF0-001 exam fragen RF0-001
NO.19 A company wants to track personnel using RFID with a resolution within 10 feet (3.1 meters). Which of
the following RFID systems would provide the BEST results?
A. Active Real Time Locating System (RTLS)
B. Passive ultra high frequency (UHF) RFID system with hand-held interrogators
C. Passive high frequency (HF) RFID system with interrogators at entry points
D. Global Positioning System (GPS)
Answer: A
CompTIA RF0-001 RF0-001
NO.20 When troubleshooting an interrogation zone, an operator observes that the interrogator is not
responding to external input or reading tags. The lights are on indicating it has power and network
connectivity. Which of the following would be the next step for the operator to take?
A. Replace the antenna cable.
B. Replace the interrogator.
C. Reboot the interrogator.
D. Reboot the antenna.
Answer: C
CompTIA RF0-001 prüfungsfrage RF0-001
Pass4Test bietet Ihnen die neusten 70-492 exam Unterlagen und LOT-442 pdf Fragen & Antworten mit hoher Qualität. Unser HP2-N40 zertifizierung und 000-156 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative LOT-404 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/RF0-001.html
没有评论:
发表评论