Es ist Ihnen weis, Pass4Test zu wählen, um die Alcatel-Lucent 4A0-101 Zertifizierungsprüfung zu bestehen. Sie können im Internet teilweise die Fragen und Antworten zur Alcatel-Lucent 4A0-101 Zertifizierungsprüfung von Pass4Test kostenlos herunterladen. Dann werden Sie mehr Vertrauen in unsere Produkte haben. Sie können sich dann gut auf Ihre Alcatel-Lucent 4A0-101 Zertifizierungsprüfung vorbereiten. Für den Fall in der Prüfung, zahlen wir Ihnen die gesammte Summe zurück.
Wenn Sie Ihre Position in der konkurrenzfähigen Gesellschaft durch die Alcatel-Lucent 4A0-101 Zertifizierungsprüfung festigen und Ihre fachliche Fähigkeiten verbessern wollen, müssen Sie gute Fachkenntnisse besitzen und sich viel Mühe für die Prüfung geben. Aber es ist nicht so einfach, die Alcatel-Lucent 4A0-101 Zertifizierungsprüfung zu bestehen. Vielleicht durch die Alcatel-Lucent 4A0-101 Zertifizierungsprüfung können Sie Ihnen der IT-Branche vorstellen. Aber man braucht nicht unbedingt viel Zeit und Energie, die Fachkenntnisse kennen zu lernen. Sie können die Schulungsunterlagen zur Alcatel-Lucent 4A0-101 Zertifizierungsprüfung von Pass4Test wählen. Sie werden zielgerichtet nach den IT-Zertifizierungsprüfungen entwickelt. Mit ihr können Sie mühelos die schwierige Alcatel-Lucent 4A0-101 Zertifizierungsprüfung bestehen.
4A0-101 ist eine Alcatel-Lucent Zertifizierungsprüfung. So ist 4A0-101 der erste Schritt zur Alcatel-Lucent Zertifizierung. Deswegen ist die 4A0-101 Zertifizierungsprüfung kürzlich immer populärer geworden. Immer mehr Leute haben sich an der 4A0-101 Zertifizierungsprüfung beteiligt. Aber die Erfolgsquote in der Prüfung ist nicht so hoch. Wählen Sie auch die relevanten Prüfungskurse, wenn Sie 4A0-101-Prüfung wählen?
Pass4Test bietet verschiedene Schulungensinstrumente und Ressourcen zur Vorbereitung der Alcatel-Lucent 4A0-101-Prüfung. Es umfasst Kurse, Praxis-Test, Test-Engine und einen Teil kostenloser PDF-Download.
Die Schulungsunterlagen zur Alcatel-Lucent 4A0-101-Prüfung von Pass4Test sind die Grundbedarfsgüter der Kandidaten, mit deren Sie sich ausreichend auf die Prüfung vorbereiten und selbstsicherer die Prüfung machen können. Sie sind seht zielgerichtet und von guter Qualität. Nur Pass4Test könnte so perfekt sein.
Exam Code: 4A0-101
Prüfungsname: Alcatel-Lucent (Alcatel-Lucent Interior Routing Protocols and High Availability)
4A0-101 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/4A0-101.html
NO.1 Which of the following statements apply to link state protocol behavior? Choose three answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C
Alcatel-Lucent 4A0-101 4A0-101 antworten
NO.2 Which of the following statements regarding distance vectors protocols are true.?
(Choose two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted beyond the
immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant routers
and how they interconnect
Answer: A
Alcatel-Lucent 4A0-101 4A0-101 4A0-101 dumps 4A0-101
NO.3 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent 4A0-101 zertifizierungsantworten 4A0-101 dumps
NO.4 Which of the following commands can be used to display the number of SPF computations that have
been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
Alcatel-Lucent originale fragen 4A0-101 4A0-101 4A0-101
NO.5 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure router
static-route 10.2.3.0/24 next-hop 10.1.2.1" command. What is the correct traceroute command to test this
static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
Alcatel-Lucent prüfungsunterlagen 4A0-101 dumps 4A0-101
NO.6 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
Alcatel-Lucent prüfungsfrage 4A0-101 antworten 4A0-101 4A0-101
NO.7 Click the exhibit button.
Routers R1 R2, and R3 are running a classful routing protocol between them. Assuming that router R1
advertises all directly connected networks, how will these networks be represented in router R3's routing
table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/24 and one entry for 10.1.2.0/24.
C. The networks will be represented with one entry of 10.0.0.0/8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/24 in router R3's route table.
Answer: C
Alcatel-Lucent 4A0-101 exam fragen 4A0-101
NO.8 Which of the following conditions will prevent an OSPF adjacency from reaching the full state? Choose
three answers.
A. MTU mismatch
B. Incorrect subnet mask
C. System interface not included in OSPF
D. Area ID not the same
E. Different metric set on each end of the link
F. Router ID not defined
Answer: A,B,D
Alcatel-Lucent zertifizierung 4A0-101 4A0-101 zertifizierung
NO.9 When a router receives an IP packet, but does not find a match in the routing table for the destination IP
address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent zertifizierungsantworten 4A0-101 prüfung 4A0-101 4A0-101 prüfung
NO.10 Click the exhibit button.
What can you deduce from the show command on router R6?
A. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.5.
B. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment;
however, this command does not indicate whether 10.10.10.3 or 10.10.10.5 is the DR or BDR.
C. The router R6 interface is in a multi-access segment. It is the BDR, which is why it is not adjacent to the
other routers.
D. The router R6 interface is in a multi-access segment. It is neither the DR nor the BDR for the segment.
The DR for this segment would be the router with router ID 10.10.10.3.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101 4A0-101
NO.11 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
Alcatel-Lucent 4A0-101 4A0-101
NO.12 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent 4A0-101 zertifizierung 4A0-101 4A0-101
NO.13 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming that
there are no stub networks, which of the following statements regarding type 4 LSA generation is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA that
is flooded to area 2.
Answer: D
Alcatel-Lucent 4A0-101 4A0-101 4A0-101 4A0-101
NO.14 Click the exhibit button.
The following command sequence is executed on router R2:
A:R2# configure router ospf router-id 10.10.10.99
A:R2# configure router router-id 10.10.10.66
On router R1, what router ID appears for router R2 directly after these commands are executed?
A. 10.10.10.99
B. 10.10.10.66
C. 10.10.10.2
D. 10.10.10.1
Answer: C
Alcatel-Lucent 4A0-101 4A0-101 testantworten 4A0-101 4A0-101 prüfungsfragen
NO.15 Static routing will be used in a network between a corporate head office, with many connected networks,
and a branch office, with one connection to the head office. Which of the following best describes the
likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more specific
static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office router will
have a default route.
Answer: D
Alcatel-Lucent zertifizierungsantworten 4A0-101 echte fragen 4A0-101 4A0-101 zertifizierung
NO.16 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach the
network behind router R2?
A. configure router static-route 139.120.121.0/24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2/24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/24 next-hop 139.120.121.2
Answer: A
Alcatel-Lucent prüfung 4A0-101 4A0-101 4A0-101 4A0-101
NO.17 Click the exhibit button.
A static route is created on router R1 using the "static-route 0.0.0.0/0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent prüfungsfrage 4A0-101 4A0-101 antworten 4A0-101 prüfungsfrage 4A0-101
NO.18 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. How many
type 4 LSAs will be present in the network?
A. One.
B. One for each of the routers in area 0
C. One for each of the external routes exported by router R1.
D. Type 4 LSAs are not generated in this network topology.
Answer: D
Alcatel-Lucent dumps 4A0-101 4A0-101
NO.19 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2 goes
down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of Hello
timeouts. At this point, both routers R1 and R2 re-compute their link state database and send updates to
their adjacent routers. Once the process is complete for all routers, the networks have converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information. At this
point, both routers R1 and R2 re-compute their link state database and send updates to their adjacent
routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link is
down. At this point, both routers R1 and R2 re-compute their link statedatabase and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
Alcatel-Lucent 4A0-101 prüfungsfragen 4A0-101 zertifizierungsantworten 4A0-101 prüfung
NO.20 What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
Alcatel-Lucent originale fragen 4A0-101 prüfung 4A0-101 4A0-101 4A0-101
Pass4Test ist eine Website, die Bedürfnisse der Kunden abdecken können. Diejenigen, die unsere Simulationssoftware zur IT-Zertifizierungsprüfung benutzt und die Prüfung betanden haben, sind unsere Stammgäste geworden. Pass4Test steht Ihne die fortschrittliche Ausbildungstechnik zur Verfügung, die Ihnen beim Bestehen der Alcatel-Lucent 4A0-101 Zertifizierungsprüfung hilft.
没有评论:
发表评论