Wenn Sie immer noch viel wertvolle Zeit und Energie für die Vorbereitung der Juniper JN0-531 Zertifizierungsprüfung benutzen und dabei nicht wissen, wie man einfach und effizient die Juniper JN0-531 Zertifizierungsprüfung bestehen kann, bieten jetzt Pass4Test Ihnen eine effektive Methode, um die Juniper JN0-531 Zertifizierungsprüfung zu bestehen. Mit Pass4Test würden Sie bessere Resultate bei weniger Einsatz erzielen.
Wenn Sie noch zögern, ob Sie Pass4Test wählen, können Sie kostenlos Teil der Fragen und Antworten in Pass4Test Website herunterladen, um unsere Zuverlässigkeit zu bestimmen. Wenn Sie alle unsere Prüfungsfragen und Antworten herunterladen, geben wir Ihnen eine 100%-Pass-Garantie, dass Sie die Juniper JN0-531 Zertifizierungsprüfung nur einmal mit einer hohen Note bestehen können.
Wenn Sie Pass4Test wählen, steht der Erfolg schon vor der Tür. Und bald können Sie Juniper JN0-531 Zertifikat bekommen. Das Produkt von Pass4Test bietet Ihnen 100%-Pass-Garantie und auch einen kostenlosen einjährigen Update-Service.
Viele IT-Fachleute wollen IT-Zertifikate erhalten. Die IT-Zertifikate werden Ihnen helfen, in der IT-Branche befördert zu werden. Das Juniper JN0-531 IT-Zertifikat ist ein beliebtes unter den vielen Zertifikaten. Obwohl es nicht so leicht ist, die Juniper JN0-531 Zertifizierungsprüfung zu bestehen, gibt es doch Methoden. Sie können viel Zeit und Energie für die Prüfung benutzen, um Ihr Know-How zu konsolidieren, oder an den effizienten Kursen teilnehmen. Die speziellen Simulationsprüfungen von Pass4Test, die Ihnen viel Zeit und Energie ersparen und Ihr Ziel erreichen können, ist sehr effizient.Pass4Test ist Ihnen eine gute Wahl.
In den wenigen Jahren ist die Juniper JN0-531-Zertifizierungsprüfung schon eine der einflussreichsten Zertiftierungsprüfung in Bezug auf das Computerkönnen geworden. Aber wie kann man einfach die Juniper JN0-531-Zertifizierungsprüfung bestehen?Unser Pass4Test kann Ihnen immer helfen, dieses Problem schnell zu lösen. Pass4Test bietet Ihnen die Trainingsinstrumente für die JN0-531-Zertifikationsprüfung. Die Inhalte der JN0-531-Zertifikationsprüfung setzen sich aus den neuesten Prüfungsmaterialien von den IT-Fachleuten zusammen.
Exam Code: JN0-531
Prüfungsname: Juniper (FWV, Specailist(JNCIS-FWV))
JN0-531 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/JN0-531.html
NO.1 You have configured the following on your device.
The VPN is not working properly. What is the problem?
A. The policy needs to have the action tunnel.
B. The VPN needs to be bound to the tunnel interface.
C. The tunnel interface needs to be placed in the trust zone.
D. The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B
Juniper echte fragen JN0-531 JN0-531 JN0-531
NO.2 What must be configured differently for a route-based VPN and a policy-based VPN?
A. proxy-id
B. proposals
C. remote gateway type
D. binding the tunnel interface
Answer: D
Juniper zertifizierungsantworten JN0-531 JN0-531 zertifizierung JN0-531
NO.3 What should you configure to insure an HA cable failure does not result in both devices attempting to
become master?
A. failover count
B. secondary path
C. monitor threshold
D. heartbeat threshold
Answer: B
Juniper zertifizierung JN0-531 JN0-531 antworten JN0-531
NO.4 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A. proxy-id, SA proposal list
B. IKE cookie, SA proposal list
C. hash [ID + Key], DH key exchange
D. SA proposal list, optional DH key exchange
Answer: AD
Juniper prüfungsunterlagen JN0-531 JN0-531 zertifizierung
NO.5 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs and has intra-zone blocking enabled on
the Evil zone.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 3
B. 4
C. 6
D. 7
Answer: D
Juniper JN0-531 dumps JN0-531 JN0-531 JN0-531 testantworten
NO.6 Which item in a virtual system is shared by default?
A. trust zone in the trust-vr
B. trust zone in the untrust-vr
C. untrust zone in the trust-vr
D. untrust zone in the untrust-vr
Answer: C
Juniper originale fragen JN0-531 JN0-531 echte fragen JN0-531 exam fragen
NO.7 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 0
B. 3
C. 4
D. 6
Answer: A
Juniper prüfungsunterlagen JN0-531 JN0-531 prüfungsunterlagen
NO.8 You have created a VPN to a dynamic peer.
Which two configured parameters must match? (Choose two.)
A. static side peer-id
B. dynamic side local-id
C. static side IP address
D. dynamic side IP address
Answer: AB
Juniper JN0-531 prüfungsunterlagen JN0-531
NO.9 What do you need to change in your VPN configuration to use certificates for authentication?
A. Replace the preshared key with the certificate name.
B. Select PFS in Phase 2, then select the certificate to be used.
C. Use a custom set of Phase 1 proposals, all beginning with rsa-.
D. Use a custom set of Phase 2 proposals, all beginning with rsa-.
Answer: C
Juniper prüfungsunterlagen JN0-531 antworten JN0-531 prüfung JN0-531 prüfungsfrage JN0-531 prüfungsfragen
NO.10 Which three statements are true regarding IKE Phase 1? (Choose three.)
A. Placing the SA proposal list in message 1 is an option.
B. The digital certificate is used to decrypt the session key.
C. The DH key exchange is used to validate the session key.
D. The DH key exchange and digital certificates are both optional.
E. The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC
Juniper exam fragen JN0-531 testantworten JN0-531 echte fragen JN0-531 JN0-531 exam fragen JN0-531
NO.11 Which three items do you need to download and install on your ScreenOS device for IKE gateways to
be able to use digital certificates without OCSP? (Choose three.)
A. the CRL list
B. the SCEP list
C. a local certificate
D. the CA public key certificate
E. the CA private key certificate
Answer: ACD
Juniper antworten JN0-531 JN0-531 zertifizierungsantworten
NO.12 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A. messages 1 & 2
B. messages 2 & 3
C. messages 3 & 4
D. messages 5 & 6
Answer: D
Juniper originale fragen JN0-531 JN0-531 originale fragen JN0-531 dumps
NO.13 Which command will show address translation for sessions that have ended?
A. snoop
B. get session
C. get log traffic
D. get dbuf stream
Answer: C
Juniper JN0-531 prüfung JN0-531
NO.14 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B
Juniper originale fragen JN0-531 antworten JN0-531 antworten
NO.15 You have implemented a hub and spoke VPN. On the hub, there are two tunnel interfaces, one to
each spoke. Both tunnel interfaces are in the same zone.
Which two configuration options will control traffic between the spokes? (Choose two.)
A. Configure the common zone to block inter-zone traffic.
B. Configure the common zone to block intra-zone traffic.
C. Configure each tunnel interface to block intra-zone traffic.
D. Configure one of the tunnel interfaces in a different zone a set policies.
Answer: BD
Juniper zertifizierung JN0-531 prüfung JN0-531 JN0-531 antworten JN0-531
NO.16 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trust-vr protocol pim
Answer: D
Juniper JN0-531 prüfungsfragen JN0-531 dumps JN0-531 zertifizierungsantworten JN0-531 dumps JN0-531 prüfung
NO.17 Click the Exhibit button.
In the exhibit, the route-based VPN on the SSG 5 needs to configured to allow access only from your PC
to Server G. The SSG 550 is configured with a policy-based VPN from Server G to your PC's host
address.
Assume the gateways are static.
Which proxy-id must be configured?
A. Local: 10.0.0.5/24Remote: 20.0.0.5/24
B. Local: 10.0.0.5/32Remote: 20.0.0.5/32
C. Local: 1.1.1.250/32Remote: 4.4.4.250/32
D. Local: 1.1.1.250/24Remote: 4.4.4.250/24
Answer: B
Juniper JN0-531 antworten JN0-531 JN0-531 JN0-531 exam fragen
NO.18 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C
Juniper JN0-531 zertifizierung JN0-531 JN0-531 exam fragen JN0-531
NO.19 Which two statements are correct regarding NHTB? (Choose two.)
A. The NHTB table can be viewed with the command get nhtb.
B. The NHTB table can be viewed with the command get interface <tunnel interface>.
C. The NHTB table can be viewed with the command get interface <physical interface>.
D. NHTB is enabled automatically when multiple VPNs are bound to a single tunnel interface.
Answer: BD
Juniper JN0-531 JN0-531 zertifizierungsantworten JN0-531 JN0-531 JN0-531 dumps
NO.20 What must be enabled to protect Phase 2 key exchanges?
A. Phase 1 PFS
B. Phase 2 SHA
C. Phase 2 3-DES
D. Phase 2 DH key exchange
Answer: D
Juniper prüfungsunterlagen JN0-531 JN0-531 JN0-531 dumps JN0-531
NO.21 Which two statements regarding NHTB are correct? (Choose two.)
A. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the hub.
B. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the spoke.
C. When configuring routing on a spoke device with one tunnel interface the route to the tunnel interface
does not require a routing gateway address.
D. When configuring routing on a hub device with one tunnel interface terminating multiple VPN spokes,
the route to the tunnel interface does not require a routing gateway address.
Answer: AC
Juniper antworten JN0-531 JN0-531 prüfung
NO.22 How many tunnels would need to be created to build a full mesh between 10 VPN devices?
A. 10
B. 20
C. 45
D. 100
Answer: C
Juniper JN0-531 zertifizierungsantworten JN0-531 JN0-531 dumps
NO.23 Your ScreenOS device has come under a SYN flood attack. In the logs, which severity level would you
search to see this event?
A. Alert
B. Critical
C. Warning
D. Emergency
Answer: D
Juniper JN0-531 JN0-531 prüfungsunterlagen
NO.24 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer: ACD
Juniper JN0-531 prüfungsfragen JN0-531 prüfung
NO.25 Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D
Juniper JN0-531 JN0-531 JN0-531 JN0-531 JN0-531 antworten
NO.26 What will happen if you type the command unset protocol vrouter trust-vr protocol ospf?
A. OSPF stops running, but the OSPF configuration is left intact.
B. All OSPF configuration parameters are removed from the vrouter only.
C. All OSPF configuration parameters are removed from all interfaces in the vrouter.
D. All OSPF configuration parameters are removed from the vrouter and from all interfaces in the vrouter.
Answer: D
Juniper zertifizierungsfragen JN0-531 JN0-531 antworten
NO.27 A VPN tunnel that uses a CA certificate will not become active.
What would be causing this problem?
A. The CA certificate has been revoked.
B. The devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B
Juniper exam fragen JN0-531 testantworten JN0-531 JN0-531 prüfungsfragen JN0-531 prüfungsfrage
NO.28 You create a policy-based VPN, and select an address group for the source address.
What will be the source component of the proxy-id seen by the remote security gateway?
A. the default 0.0.0.0/0
B. the last member of the address group
C. the first member of the address group
D. the subnet that contains all addresses in the address group
Answer: A
Juniper JN0-531 JN0-531
NO.29 Which two statements are true regarding the use of dialup VPNs? (Choose two.)
A. They are initiated only by the remote host PC.
B. They can only be connected to the trust zone on a ScreenOS device.
C. They are configured so that the first IKE message will always have the SA proposal list.
D. They can be used as an alternative to connect remote users when a ScreenOS device has reached the
maximum number of LAN-to-LAN tunnels.
Answer: AC
Juniper JN0-531 JN0-531 exam fragen JN0-531 prüfung JN0-531 prüfung
NO.30 A VPN tunnel that uses a CA certificate has failed Phase 1 negotiations. The peer's certificate has
been rejected.
What would be causing this problem?
A. The CA certificate has been revoked.
B. One of the peering devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B
Juniper JN0-531 exam fragen JN0-531 dumps JN0-531
Die Qualifikation ist nicht gleich die Fähigkeit eines Menschen. Die Qualifikation bedeutet nur, dass Sie dieses Lernerlebnis hat. Und die reale Fähigkeit sind in der Ppraxis entstanden. Sie hat keine direkte Verbindung mit der Qualifikation. Sie sollen niemals das Gefühl haben, dass Sie nicht exzellent ist. Sie sollen auch nie an Ihrer Fähigkeit zweifeln. Wenn Sie die Juniper JN0-531-Prüfung wählen, sollen Sie sich bemühen, die Prüfung zu bestehen. Wenn Sie sich fürchten, die Prüfung nicht bestehen zu können, wählen Sie doch die Sulungsunterlagen zur Juniper JN0-531-Prüfung von Pass4Test. Egal ob welche Qualifikation haben, können Sie ganz einfach die Inhalte der Schulungsunterlagen verstehen und die Prüfung erfolgreich abschließen.
没有评论:
发表评论