Was ist Ihr Traum? Wünschen Sie nicht, in Ihrer Karriere großen Erfolg zu machen? Die Antwort ist unbedingt ,,Ja". So müssen Sie ständig Ihre Fähigkeit entwickeln. Wie können Sie Ihre Fähigkeit entwickeln, wenn Sie in der IT-Industrie arbeiten? Teilnahme an den IT-Zertifizierungsprüfungen und Erhalten der Zertifizierung ist eine gute Weise, Ihre IT-Fähigkeit zu erhöhen. Jetzt, LSI L50-501 Prüfung ist eine sehr populäre Prüfung. Wollen Sie die Zertifizierung bekommen? So melden Sie an der Prüfung an und Pass4Test kann Ihnen helfen, deshalb sollen Sie sich nicht darum sorgen.
Wir Pass4Test sind eine professionelle Website. Wir bieten jedem Teilnehmer guten Service, sowie Vor-Sales-Service und Nach-Sales-Service. Wenn Sie LSI L50-501 Zertifizierungsunterlagen von Pass4Test wollen, können Sie zuerst das kostlose Muster benutzen. Sie können sich fühlen, ob die Unterlagen sehr geeignet sind. Damit können Sie die Qualität unserer LSI L50-501 Zertifizierungsunterlagen überprüfen und dann sich entscheiden für den Kauf. Falls Sie durchgefallen wären, geben wir Ihnen voll Geld zurück. Oder Sie können wieder einjährige kostlose Aktualisierung auswählen.
Nach den Forschungen über die Fragen und Antworten in den letzten Jahren sind die Fragen und Antworten zur LSI L50-501 Zertifizierungsprüfung von Pass4Test den realen Prüfung sehr ähnlich. Pass4Test verspricht, dass Sie zum ersten Mal die LSI L50-501 Zertifizierungsprüfung 100% bestehen können.
Das Expertenteam von Pass4Test nutzt ihre Erfahrungen und Kenntnisse aus, um die Schulungsunterlagen zur LSI L50-501 Zertifizierungsprüfung zu bearbeiten. Unsere Schulungsunterlagen zur LSI L50-501 Zertifizierungsprüfung sind bei den Kunden sehr beliebt. Das sind die Ergebnisse der fleißigen Experten-Teams. Diese Simulationsfragen und Antworten sind von guter Qualität. Und die Ähnlichkeit beträgt über 95%. Sie sind eher zuverlässig. Wenn Sie die Trainingsinstrumente von Pass4Test benutzen, können Sie 100% die LSI L50-501 Zertifizierungsprüfung bestehen.
Wollen Sie an LSI L50-501 Zertifizierungsprüfung teilnehmen? Sorgen Sie sich um diese Prüfung? Wünschen Sie sich an der Prüfung melden aber Fürchten Sie Misserfolg an dieser Prüfung? Das macht nichts, melden Sie getrost an. Wenn Sie Pass4Test Prüfungsunterlagen benutzen, sind keine Probleme in Ihrer Prüfung vorhanden. Obwohl Sie keine Zuversicht dieser Prüfung haben, können Sie einmal diese Prüfung bestehen, wenn Sie L50-501 dumps von Pass4Test benutzen. Glauben Sie nicht? Kommen Sie bitte zu Pass4Test und Informieren Sie sich. Außerdem können Sie einen Teil der LSI L50-501 dumps probieren. Damit können Sie finden, dass die Prüfungsunterlagen die Garantie für den Erfolg der Prüfung sind.
Wenn Sie die Fragen und Antworten zur LSI L50-501 Zertifizierungsprüfung kaufen, können Sie nicht nur die LSI L50-501 Zertifizierungsprüfung erfolgreich bestehen, sonder einen einjährigen kostenlosen Update-Service genießen. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen die gesammte Summe zurück. Sie können im Internet teilweise die Fragen und Antworten zur LSI L50-501 Zertifizierungsprüfung kostenlos als Probe herunterladen, um die Zuverlässigkeit unserer Produkte zu testen.
Exam Code: L50-501
Prüfungsname: LSI SVM5 Implementation Engineer
Aktulisiert: 2014-01-26
Nummer: 119 Q&As
L50-501 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/L50-501.html
NO.1 When adding storage to an existing SVM pool, what must be considered?
A. Growing the LUN will provide better utilization of storage.
B. Always pay attention to the performance characteristics of the storage.
C. Always select storage with different storage characteristics.
D. Adding storage to an existing pool will reduce performance.
Answer: B
LSI L50-501 L50-501 exam fragen L50-501 antworten L50-501
NO.2 Two SVM servers in SVM Domain A are connected over Fibre Channel with two SVM servers in SVM
Domain B. The SVM servers' HBA at each domain can see the SVM servers' HBA at the other SVM
domain. What should you do to interconnect the SVM domains?
A. An SVM automatically negotiates the connection with the SVMs in other domains over Fibre Channel.
B. SVM domains should not be interconnected.
C. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect SVM
Domain.
D. To interconnect two SVM domains, select Tools > Options > General > Configuration > Connect FC
Domain.
Answer: A
LSI prüfung L50-501 L50-501 L50-501
NO.3 What are two requirements to set up a stretched SVM domain across two datacenters on the same
campus? (Choose two.)
A. Both SVM servers must be located on the same site.
B. The sites must be interconnected through two fabrics/ISLs.
C. Each site must have a minimum of one copy of the setup volume.
D. A dedicated IP link must be provided to interconnect the SVM servers.
Answer: B,C
LSI zertifizierung L50-501 zertifizierungsantworten L50-501 zertifizierung
NO.4 Which statement describes what should be performed after a DPM image upgrade?
A. The DPM rank must be modified.
B. Set the DPM maximum frame size.
C. The DPM image upgrade does not change the DPM configuration parameters.
D. Configure the DPM ports type and speed.
Answer: C
LSI L50-501 L50-501 zertifizierungsantworten L50-501
NO.5 During the SVM Management software installation, which two adapters would you select to be
controlled by the SVM? (Choose two.)
A. Emulex Fibre Channel adapter
B. Qlogic Fibre Channel adapter
C. Microsoft iSCSI initiator
D. Smart Array controller
Answer: B,C
LSI zertifizierungsantworten L50-501 originale fragen L50-501 L50-501 echte fragen L50-501 prüfungsfrage
NO.6 Which parameter must be the same for SVM servers that manage the same SVM domain?
A. serial number
B. SVM domain name
C. computer name
D. WWNN
Answer: B
LSI L50-501 testantworten L50-501 L50-501 L50-501
NO.7 A customer is running a cluster with cluster nodes and storage on either site and requires synchronous
mirroring across the two sites. You proposed a stretched SVM domain and now you need to configure the
zoning. Which two zoning rules apply to this configuration? (Choose two.)
A. Each DPM must see both storage systems.
B. Each DPM must only see the local storage system.
C. Each cluster node must see both SVM servers.
D. The SVM servers must see each other.
Answer: A,D
LSI L50-501 prüfungsfrage L50-501
NO.8 Where is the SVM metadata stored?
A. On a mirror, between the two SVM internal hard drives.
B. On a mirror, between the managed storage array LUNs and the SVM internal hard drive.
C. On a mirror, between managed storage array LUNs.
D. On a mirror, between the two SVM internal hard drive partitions.
Answer: C
LSI prüfung L50-501 L50-501 echte fragen
NO.9 A customer wants to create a SVM stripe. Which SVM stripe value should be set?
A. 64 KB
B. 256 KB
C. 512 KB
D. 1 MB
Answer: D
LSI zertifizierungsfragen L50-501 L50-501 zertifizierung L50-501 L50-501
NO.10 What should you do before starting the SVM server software upgrade process?
A. Reboot the SVM server.
B. Disconnect the SVM Fibre Channel cables.
C. Shut down the SVM Web server.
D. Uninstall the SVM server agent.
Answer: B
LSI L50-501 L50-501
NO.11 Which statement about the SVM server software upgrade is true?
A. The SVM server must be rebooted as part of the software upgrade process.
B. The SVM server must only be rebooted on major versions, e.g 5.1 to 5.2.
C. The SVM server can stay online during the software upgrade.
D. The DPMs must be taken offline during the SVM server reboot.
Answer: A
LSI prüfungsfragen L50-501 antworten L50-501 L50-501 prüfungsunterlagen
NO.12 What is the difference between the active SVM server and the passive SVM server?
A. The passive SVM server takes control when the active SVM server is too busy.
B. The passive SVM server is a standby server only and does not perform any management tasks.
C. The passive SVM server can only modify objects but cannot create objects.
D. The passive SVM server can only manage user accounts.
Answer: B
LSI L50-501 prüfungsfrage L50-501 L50-501
NO.13 Your current SAN environment includes a storage system with LUNs exposed directly to Windows hosts.
You have been asked to integrate this storage system into the new SVM domain. Which statement is
correct?
A. The existing data can be moved to an SVM virtual volume while the application is still writing to the
source LUN.
B. The physical LUN containing the data must be unmounted from the host while the data is been moved
to an SVM virtual volume.
C. The physical LUN containing the data must be mounted to the host while the data is been moved to an
SVM virtual volume.
D. The physical LUN containing the data must be mounted to the SVM servers while the data is been
moved to an SVM virtual volume.
Answer: B
LSI L50-501 L50-501 prüfung L50-501 L50-501 testantworten
NO.14 At the end of the SVM installation, which three actions should you perform to ensure that the installation
is correct.? (Choose three.)
A. Test failover between two SVMs to make sure that you can successfully failover between SVMs.
B. Make sure that the SVM recognizes the DPM and that the DPM recognizes all of the devices that are
connected to the DPM ports.
C. Make sure that the SVM and DPM recognize the LUNs available on the storage array.
D. Make sure that the DPMs can communicate with each other.
E. Make sure that the LSI Failover Driver is installed on the SVM server.
Answer: A,B,C
LSI L50-501 zertifizierungsantworten L50-501 zertifizierung
NO.15 You have a customer that feels that their application can take advantage of striping their data. Which
two conditions will improve performance? (Choose two.)
A. Striping across two different storage systems.
B. Servers are running a transactional application where I/Os per second are required.
C. Disks that are available for inclusion in the stripe set are not of equal size.
D. Disks that are available for inclusion in the stripe set are of equal size.
Answer: A,D
LSI L50-501 L50-501 zertifizierungsfragen L50-501 prüfungsfragen
Pass4Test bietet Ihnen die neusten 1Y0-350 exam Unterlagen und 000-656 pdf Fragen & Antworten mit hoher Qualität. Unser CAT-380 zertifizierung und 000-588 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative HP0-J62 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/L50-501.html
没有评论:
发表评论